Hammer Crusher
European type Hammer Crusher is widely used in mining, building materials, chemical industry, metallurgy, cement, ceramic, refractory industry and so on. The European-type Hammer Crusher is suitable for secondary and fine crushing of all kinds of rocks with compressive strength less than 320 MPa.
We're here to help:
Easy ways to get the answers you need.
0086-21-58386189, 58386176
[email protected]
0086-21-58386211
- High capacity, high crushing ratio.
- Simple structure, easy maintenance, easy operation.
- Even output granularity and electricity-saving.
- The water content of materials is less than 10% - 15%.
The European-type Hammer Crusher is of high capacity, high crushing ratio, simple structure, uniform output granularity as well as low electricity consumption, and is easy to maintain and operate. The moisture of the raw material should be less than 10% - 15% to avoid the blocking of material during the crushing process.
hammer crusher working principle
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.
Supply the most current design and technical expertise;Supply parts sales and training service far beyond the initial sale;Your profits with quality parts and expert service.
